Pressure Balanced Stem and Cage Guiding Perforated Plug Type Control Valve

Guided by big area bushing and cage, working trims are of dynamic stability. The series is characterized by balanced trims and can endure very high pressure drops. It only needs small thrust force to reliably modulate. Perforated cylinder Plug can effectively protect the sealing surface of seat from being damaged by high speed flow scoured. Combined with complex piston rings, it also presents excellent seal performance.
SBC series suits normal and heavy duty applications.

Standard Specification
Valve Body
Type: Cast globe Valve
Nominal Size: DN80, 100, 150, 200, 250, 300, 350, 400
Nominal Pressure: ANSI 150, 300
DIN PN16, 25, 40
JIS 10K, 20K, 30K
GB PN1.6, 2.5, 4.0 MPa
End Connection: Flange ANSI B16.5 RF, RTJ
DIN2543/2544/2545 RF
JISB2201 RF
JB/T81 RF
JB/T82.2 FM
Weld: ANSI B16.5 SW(DN≤50); BW(DN＞50)
Face to Face Dimension:
ANSI150RF, JIS10K(IEC60534-3-1 37 Series)
ANSI300RF, JIS20K, JIS30K(IEC60534-3-1 38 Series)
ANSI150/300 RTJ (ASME B16.10 CLASS 150/300RTJ)
DIN PN16, 25, 40 (DIN3202-F1)
GB PN1.6, 2.5, 4.0 MPa (ISO5752 1 Series)
Please refer to table 6.1~6.2
Body Material:Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range
Bonnet Type:STD type……-46℃～200℃; 200℃～300℃
Radiation fin type……300℃～530℃
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material:PTFE V-ring compound packing,graphite compound packing,
graphite packing,
Operating Temp. &Pressure range is shownn in table 2,figure2
Seal Gasket:Spiral wound gasket(PTFE+316,Flexible Graphite+316),
Graphite with metal gasket(Graphite+316,Graphite+304)

Valve Trim
Plug Type:Perforated cylinder plug
Flow Characteristic:EQ%,Linearity (Please refer to figure4)
Trim Material:Please refer to table 3 for STD material assembly,operated Temp. &Pressure Range
Actuator
Type:Multi-spring diaphragm
Air Supply:Max. 6bar
Ambient Temp.:-20℃~+80℃
Spring range:As shown in Table 5
Air Connection:G1/8(SA1)；G1/4(SA2)；G3/4(SA3)
STD Specification:As shown in Table 5

Accessory
Positioner,Filter-regulator valve,Solenoid valve,Limit switch,
Valve position Transmitter,Booster relay,Lock-valve,Handwheel,etc.